1

Introduction

The Company HaeSung Construction, Inc. based in US, whose main businesses are plant construction (Steel Structure, Mecha

2

HSE Governance

1.0 Purpose The purpose of the HSE Governance structure is to define the policy & principles of the HSE Management Syst

3

Chapter – 1 - HSE MANAGEMENT

4

Procedure No.: 1.1 - HSE Reporting & Monitoring

1.0 Introduction Purpose of HSE reporting The main objective of HSE reporting is to support operational management: “we

5

Procedure No.: 1.2 - Identification, Evaluation and Control of Occupational Health & Safety Risks and Environmental Aspects and Associated Impacts

1.0 Purpose To establish a procedure for identification of occupational health & safety risks and evaluate the same for

6

Procedure for Identification, Evaluation and Control of Environmental Aspects and Associated Impacts

1.0 Purpose To establish a procedure for Identification, Evaluation and Control of environmental aspects and associated

7

Procedure No.: 1.3 - Identification and Compliance of HSE Legal Requirements

1.0 Purpose To ensure that legislation and other requirements applicable to HAESUNG CONSTRUCTION, INC. activities are id

8

Procedure No.: 1.4 - HSE Objectives, Targets and Improvement Agenda

1.0 Purpose To ensure that: Improvements are made to protect employees’ health and safety and reduce adverse environment

9

Procedure No.: 1.5 - Reporting of Accidents, Incidents, corrective and preventive action

1.0 Purpose To ensure that all HSE accidents and incidents are reported, investigated and actions taken so as to prevent

10

Procedure No.: 1.6 - Training, Awareness and Competence for HSE

1.0 Purpose To ensure that employees are competent and adequately trained to perform their duties safely. 2.0 Scope It

11

Procedure No.: 1.7 - Emergency Preparedness

1.0 Purpose To ensure that robust, clear and tested emergency plans exist and that suitable persons are trained to imple

12

Procedure No.: 1.8 - Contract HSE Performance Management Process

1.0 Purpose To ensure that Sub-Contractors are adequately controlled, their safety assured and that HSC’s reputation is

13

Procedure No.: 1.9 - HSE Audit & Inspection

1.0 Purpose To evaluate implementation of and compliance with the HSE management system and to ensure its continued effe

14

Chapter – 2 - OCCUPATIONAL HEALTH & SAFETY

15

PROCEDURE No.: 2.1 - INDUSTRIAL HYGIENE

1.0 Purpose To ensure that all employees, indirect personnel and others who may be affected by HSC activities are adequa

16

Procedure No.: 2.2 - Working At Height/Fall Prevention

1.0 Purpose To prevent injury and property damage when conducting work at height. 2.0 Scope This procedure is applicabl

17

Procedure No.: 2.3 - Confined Space Work

1.0 Purpose To ensure the safety of all personnel required to work in confined spaces 2.0 Scope All business locations

18

Procedure No.: 2.4 - Electrical Safety

1.0 Purpose The purpose of this standard is to define a set of mandatory requirements to ensure safety of personnel who

19

Procedure No.: 2.5 - Safe Lifting Operations

1.0 Purpose This procedure is prepared to ensure effective management on Lifting Operation and Lifting Accessories to mi

20

Procedure No.: 2.6 - Excavation Work

1.0 Purpose & Scope To ensure that excavation work is controlled and managed safely. 2.0 Definitions Competent Perso

21

Procedure No.: 2.7 - Personal Protective Equipment (PPE)

1.0 Purpose To ensure that personal protective equipment is controlled, issued and maintained in good condition to provi

22

Procedure No.: 2.8 - Energy Isolation (Lock out Tag out)

1.0 Purpose Energy Isolation procedures are followed in order to ensure the safety of employees at the workplace. These

23

Procedure No.: 2.9 - Permit to Work System

1.0 Introduction Permit-to-work (PTW) form an essential part of safe systems of work for various types tasks involving r

24

Procedure No.: 2.10 - Hot Works

1.0 Purpose To ensure adequate protection to people and plant during hot work operations 2.0 Scope All business locatio

25

Procedure No.: 2.11 - Respirable Crystalline Silica

1.0 Purpose Protect employee health and comply with OSHA regulation (29 CFR 1926.1153) PEL: 50 μg/m³ (8-hour TWA) AL: 25

26

Chapter – 3 - ENVIRONMENT

27

Procedure No.: 3.1 - Discharge of Water

1.0 Purpose To protect natural waters 2.0 Scope All business locations under HSC control, where there is a risk of ecol

28

Procedure No.: 3.2 - Air Emissions Control

1.0 Purpose To ensure that air emissions are controlled to legal requirements. 2.0 Scope This document is the minimum r

29

Procedure No.: 3.3 - Waste Management

1.0 Purpose To ensure effective management of waste, movement, storage and disposal of waste produced by HSC & to minimi

30

Procedure No.: 3.4 - Conservation of Soil and Ground Water

1.0 Purpose To ensure the protection of soil and groundwater from spills of fuels, chemicals and ecologically toxic mat

31

Procedure No.: 3.5 - Water Supply & Conservation

1.0 Purpose To ensure that water resources are conserved. 2.0 Scope All HSC operation site. 3.0 Responsibilities 3.1 S